Magnasonic MLD1525 User Manual download pdf (Page 12)

Connection steps:

 Read the user guide supplied with your computer and ensure that it has a VGA connector

 Make sure that the power of the LCD-TV and the PC are off

 Connect a D type 15-pin VGA interface cable (not supplied) to the VGA video interface connector

on the PC. Then connect the other end to the VGA video interface connector on the back of the

LCD-TV. Tighten the screws on the VGA connectors once they are firmly connected

 Turn on the power of the LCD-TV first and then turn on the power of the PC

 Press the Input button to set the video input mode of the LCD-TV to “ PC”

 Our LCD-TV can support the resolutions listed in table 2 (see table below). If the resolution you

want is not listed, the LCD-TV may not display the image properly

Table 2

Resolution 640x480 800x600 1024x768 720x400

Horizontal frequency

( KHz)

20-55 20-55 20-70 31.47

Vertical frequency

( Hz)

60-75 60-75 60-75 70

Clock

( MHz)

32.5-60 32.5-60 25-80 28.322

B) Connect to external AV devices( DVD Players, Video Camera’s etc.)

using Composite and S-Video inputs

Connection steps:

 Read the user guide supplied with your AV device and ensure that it has Composite or S-Video

connectors

 Make sure that the power of the LCD-TV and the AV device are off

 Connect a Composite video cable (supplied) to the yellow Composite video connector input on the

back of the LCD TV. Now insert the other end of the composite cable into the yellow Composite

connector output on the AV device

 Alternatively connect a S-video cable (not supplied, provides better image quality) to the S-Video

connector on the back of the LCD TV. Now insert the other end of the S-Video cable into the

S-Video connector on the AV device

 Connect the RCA audio cables (white and red connectors) from the AV devices’ RCA audio

output connectors to the RCA audio input connectors on the back of the LCD-TV

 Turn on the power of the LCD-TV first, and then turn on the power of the AV device

 Press the Input button to set the video input mode of the LCD-TV to “AUX” if you used a

Composite video cable to make the connection. Press the Input button to set the video input mode

of the LCD-TV to “S-Video” if you used a S-Video video cable to make the connection.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

No comments

Magnasonic MLD1525 User Manual Page 12